The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

wpa_supplicant (8)
  • wpa_supplicant (8) ( FreeBSD man: Команды системного администрирования )
  • >> wpa_supplicant (8) ( Linux man: Команды системного администрирования )
  • Ключ wpa_supplicant обнаружен в базе ключевых слов.
  •  

    NAME

    wpa_supplicant - Wi-Fi Protected Access client and IEEE 802.1X supplicant
     
    

    SYNOPSIS

    wpa_supplicant [ -BddehLqqvw ] [ -iifname ] [ -cconfig file ] [ -Ddriver ]

     

    OVERVIEW

    Wireless networks do not require physical access to the network equipment in the same way as wired networks. This makes it easier for unauthorized users to passively monitor a network and capture all transmitted frames. In addition, unauthorized use of the network is much easier. In many cases, this can happen even without user's explicit knowledge since the wireless LAN adapter may have been configured to automatically join any available network.

    Link-layer encryption can be used to provide a layer of security for wireless networks. The original wireless LAN standard, IEEE 802.11, included a simple encryption mechanism, WEP. However, that proved to be flawed in many areas and network protected with WEP cannot be consider secure. IEEE 802.1X authentication and frequently changed dynamic WEP keys can be used to improve the network security, but even that has inherited security issues due to the use of WEP for encryption. Wi-Fi Protected Access and IEEE 802.11i amendment to the wireless LAN standard introduce a much improvement mechanism for securing wireless networks. IEEE 802.11i enabled networks that are using CCMP (encryption mechanism based on strong cryptographic algorithm AES) can finally be called secure used for applications which require efficient protection against unauthorized access.

    wpa_supplicant is an implementation of the WPA Supplicant component, i.e., the part that runs in the client stations. It implements WPA key negotiation with a WPA Authenticator and EAP authentication with Authentication Server. In addition, it controls the roaming and IEEE 802.11 authentication/association of the wireless LAN driver.

    wpa_supplicant is designed to be a "daemon" program that runs in the background and acts as the backend component controlling the wireless connection. wpa_supplicant supports separate frontend programs and an example text-based frontend, wpa_cli, is included with wpa_supplicant.

    Before wpa_supplicant can do its work, the network interface must be available. That means that the physical device must be present and enabled, and the driver for the device must have be loaded. Note, however, that the '-w' option of the wpa_supplicant daemon instructs the daemon to continue running and to wait for the interface to become available. Without the '-w' option, the daemon will exit immediately if the device is not already available.

    After wpa_supplicant has configured the network device, higher level configuration such as DHCP may proceed. There are a variety of ways to integrate wpa_supplicant into a machine's networking scripts, a few of which are described in sections below.

    The following steps are used when associating with an AP using WPA:

    *
    wpa_supplicant requests the kernel driver to scan neighboring BSSes
    *
    wpa_supplicant selects a BSS based on its configuration
    *
    wpa_supplicant requests the kernel driver to associate with the chosen BSS
    *
    If WPA-EAP: integrated IEEE 802.1X Supplicant or external Xsupplicant completes EAP authentication with the authentication server (proxied by the Authenticator in the AP)
    *
    If WPA-EAP: master key is received from the IEEE 802.1X Supplicant
    *
    If WPA-PSK: wpa_supplicant uses PSK as the master session key
    *
    wpa_supplicant completes WPA 4-Way Handshake and Group Key Handshake with the Authenticator (AP)
    *
    wpa_supplicant configures encryption keys for unicast and broadcast
    *
    normal data packets can be transmitted and received
     

    SUPPORTED FEATURES

    Supported WPA/IEEE 802.11i features:

    *
    WPA-PSK ("WPA-Personal")
    *
    WPA with EAP (e.g., with RADIUS authentication server) ("WPA-Enterprise") Following authentication methods are supported with an integrate IEEE 802.1X Supplicant:
    *
    EAP-TLS
    *
    EAP-PEAP/MSCHAPv2 (both PEAPv0 and PEAPv1)
    *
    EAP-PEAP/TLS (both PEAPv0 and PEAPv1)
    *
    EAP-PEAP/GTC (both PEAPv0 and PEAPv1)
    *
    EAP-PEAP/OTP (both PEAPv0 and PEAPv1)
    *
    EAP-PEAP/MD5-Challenge (both PEAPv0 and PEAPv1)
    *
    EAP-TTLS/EAP-MD5-Challenge
    *
    EAP-TTLS/EAP-GTC
    *
    EAP-TTLS/EAP-OTP
    *
    EAP-TTLS/EAP-MSCHAPv2
    *
    EAP-TTLS/EAP-TLS
    *
    EAP-TTLS/MSCHAPv2
    *
    EAP-TTLS/MSCHAP
    *
    EAP-TTLS/PAP
    *
    EAP-TTLS/CHAP
    *
    EAP-SIM
    *
    EAP-AKA
    *
    EAP-PSK
    *
    EAP-PAX
    *
    LEAP (note: requires special support from the driver for IEEE 802.11 authentication)
    *
    (following methods are supported, but since they do not generate keying material, they cannot be used with WPA or IEEE 802.1X WEP keying)
    *
    EAP-MD5-Challenge
    *
    EAP-MSCHAPv2
    *
    EAP-GTC
    *
    EAP-OTP
    *
    key management for CCMP, TKIP, WEP104, WEP40
    *
    RSN/WPA2 (IEEE 802.11i)
    *
    pre-authentication
    *
    PMKSA caching
     

    AVAILABLE DRIVERS

    The available drivers to specify with the -D option are:

    hostap
    (default) Host AP driver (Intersil Prism2/2.5/3). (this can also be used with Linuxant DriverLoader).
    hermes
    Agere Systems Inc. driver (Hermes-I/Hermes-II).
    madwifi
    MADWIFI 802.11 support (Atheros, etc.).
    atmel
    ATMEL AT76C5XXx (USB, PCMCIA).
    wext
    Linux wireless extensions (generic).
    ndiswrapper
    Linux ndiswrapper.
    broadcom
    Broadcom wl.o driver.
    ipw
    Intel ipw2100/2200 driver.
    wired
    wpa_supplicant wired Ethernet driver
    bsd
    BSD 802.11 support (Atheros, etc.).
    ndis
    Windows NDIS driver.
     

    COMMAND LINE OPTIONS

    -B
    Run daemon in the background.
    -i ifname
    Interface to listen on.
    -c filename
    Path to configuration file.
    -D driver
    Driver to use. See the available options below.
    -d
    Increase debugging verbosity (-dd even more).
    -K
    Include keys (passwords, etc.) in debug output.
    -t
    Include timestamp in debug messages.
    -e
    Use external IEEE 802.1X Supplicant (e.g., xsupplicant) (this disables the internal Supplicant).
    -h
    Help. Show a usage message.
    -L
    Show license (GPL and BSD).
    -q
    Decrease debugging verbosity (-qq even less).
    -v
    Show version.
    -w
    wait for interface to be added, if needed. normally, wpa_supplicant will exit if the interface is not there yet.
    -N
    Start describing new interface.
     

    EXAMPLES

    In most common cases, wpa_supplicant is started with:

    wpa_supplicant -Bw -c/etc/wpa_supplicant.conf -iwlan0
    

    This makes the process fork into background and wait for the wlan0 interface if it is not available at startup time.

    The easiest way to debug problems, and to get debug log for bug reports, is to start wpa_supplicant on foreground with debugging enabled:

    wpa_supplicant -c/etc/wpa_supplicant.conf -iwlan0 -d
    

    wpa_supplicant can control multiple interfaces (radios) either by running one process for each interface separately or by running just one process and list of options at command line. Each interface is separated with -N argument. As an example, following command would start wpa_supplicant for two interfaces:

    wpa_supplicant \
            -c wpa1.conf -i wlan0 -D hostap -N \
            -c wpa2.conf -i ath0 -D madwifi
    
     

    OS REQUIREMENTS

    Current hardware/software requirements:

    *
    Linux kernel 2.4.x or 2.6.x with Linux Wireless Extensions v15 or newer
    *
    FreeBSD 6-CURRENT
    *
    Microsoft Windows with WinPcap (at least WinXP, may work with other versions)
     

    SUPPORTED DRIVERS

    Host AP driver for Prism2/2.5/3 (development snapshot/v0.2.x)
    (http://hostap.epitest.fi/) Driver needs to be set in Managed mode ('iwconfig wlan0 mode managed'). Please note that station firmware version needs to be 1.7.0 or newer to work in WPA mode.
    Linuxant DriverLoader
    (http://www.linuxant.com/driverloader/) with Windows NDIS driver for your wlan card supporting WPA.
    Agere Systems Inc. Linux Driver
    (http://www.agere.com/support/drivers/) Please note that the driver interface file (driver_hermes.c) and hardware specific include files are not included in the wpa_supplicant distribution. You will need to copy these from the source package of the Agere driver.
    madwifi driver for cards based on Atheros chip set (ar521x)
    (http://sourceforge.net/projects/madwifi/) Please note that you will need to modify the wpa_supplicant .config file to use the correct path for the madwifi driver root directory (CFLAGS += -I../madwifi/wpa line in example defconfig).
    ATMEL AT76C5XXx driver for USB and PCMCIA cards
    (http://atmelwlandriver.sourceforge.net/).
    Linux ndiswrapper
    (http://ndiswrapper.sourceforge.net/) with Windows NDIS driver.
    Broadcom wl.o driver
    This is a generic Linux driver for Broadcom IEEE 802.11a/g cards. However, it is proprietary driver that is not publicly available except for couple of exceptions, mainly Broadcom-based APs/wireless routers that use Linux. The driver binary can be downloaded, e.g., from Linksys support site (http://www.linksys.com/support/gpl.asp) for Linksys WRT54G. The GPL tarball includes cross-compiler and the needed header file, wlioctl.h, for compiling wpa_supplicant. This driver support in wpa_supplicant is expected to work also with other devices based on Broadcom driver (assuming the driver includes client mode support).
    Intel ipw2100 driver
    (http://sourceforge.net/projects/ipw2100/)
    Intel ipw2200 driver
    (http://sourceforge.net/projects/ipw2200/)
    Linux wireless extensions
    In theory, any driver that supports Linux wireless extensions can be used with IEEE 802.1X (i.e., not WPA) when using ap_scan=0 option in configuration file.
    Wired Ethernet drivers
    Use ap_scan=0.
    BSD net80211 layer (e.g., Atheros driver)
    At the moment, this is for FreeBSD 6-CURRENT branch.
    Windows NDIS
    The current Windows port requires WinPcap (http://winpcap.polito.it/). See README-Windows.txt for more information.

    wpa_supplicant was designed to be portable for different drivers and operating systems. Hopefully, support for more wlan cards and OSes will be added in the future. See developer.txt for more information about the design of wpa_supplicant and porting to other drivers. One main goal is to add full WPA/WPA2 support to Linux wireless extensions to allow new drivers to be supported without having to implement new driver-specific interface code in wpa_supplicant.  

    ARCHITECTURE

    The wpa_supplicant system consists of the following components:

    wpa_supplicant.conf
    the configuration file describing all networks that the user wants the computer to connect to.
    wpa_supplicant
    the program that directly interacts with the network interface.
    wpa_cli
    the client program that provides a high-level interface to the functionality of the daemon.
    wpa_passphrase
    a utility needed to construct wpa_supplicant.conf files that include encrypted passwords.
     

    QUICK START

    First, make a configuration file, e.g. /etc/wpa_supplicant.conf, that describes the networks you are interested in. See wpa_supplicant(5) for details.

    Once the configuration is ready, you can test whether the configuration works by running wpa_supplicant with following command to start it on foreground with debugging enabled:

    wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -d
        
    

    Assuming everything goes fine, you can start using following command to start wpa_supplicant on background without debugging:

    wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -B
        
    

    Please note that if you included more than one driver interface in the build time configuration (.config), you may need to specify which interface to use by including -D<driver name> option on the command line.  

    INTERFACE TO PCMCIA-CS/CARDMRG

    For example, following small changes to pcmcia-cs scripts can be used to enable WPA support:

    Add MODE="Managed" and WPA="y" to the network scheme in /etc/pcmcia/wireless.opts.

    Add the following block to the end of 'start' action handler in /etc/pcmcia/wireless:

    if [ "$WPA" = "y" -a -x /usr/local/bin/wpa_supplicant ]; then
        /usr/local/bin/wpa_supplicant -Bw -c/etc/wpa_supplicant.conf -i$DEVICE
    fi
        
    

    Add the following block to the end of 'stop' action handler (may need to be separated from other actions) in /etc/pcmcia/wireless:

    if [ "$WPA" = "y" -a -x /usr/local/bin/wpa_supplicant ]; then
        killall wpa_supplicant
    fi
        
    

    This will make cardmgr start wpa_supplicant when the card is plugged in. wpa_supplicant will wait until the interface is set up--either when a static IP address is configured or when DHCP client is started--and will then negotiate keys with the AP.  

    SEE ALSO

    wpa_background(8) wpa_supplicant.conf(5) wpa_cli(8) wpa_passphrase(8)  

    LEGAL

    wpa_supplicant is copyright (c) 2003-2005, Jouni Malinen <jkmaline@cc.hut.fi> and contributors. All Rights Reserved.

    This program is dual-licensed under both the GPL version 2 and BSD license. Either license may be used at your option.


     

    Index

    NAME
    SYNOPSIS
    OVERVIEW
    SUPPORTED FEATURES
    AVAILABLE DRIVERS
    COMMAND LINE OPTIONS
    EXAMPLES
    OS REQUIREMENTS
    SUPPORTED DRIVERS
    ARCHITECTURE
    QUICK START
    INTERFACE TO PCMCIA-CS/CARDMRG
    SEE ALSO
    LEGAL


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру